Skip Navigation Links

Properties and Advantages

About

   Properties and Advantages

Properties
  • Enlarged internal diameter - hydraulic flow.
  • Long pipelines.
  • Extensive pressures and rigidity ranges, according to the engineering needs and requirements.
  • Nonmetallic pipe with high internal and external corrosive resistance.
  • Excellent and constant internal smoothness, unchanged over the years.
  • Low weight.
  • GRP connectors manufactured by Fibertech. 
  • A wide variety of pipe fittings, including special shapes, according to individual
  • Optional pipe bandaging, able to carry axial loads.
  • Reinforced internal and external layers.
  • Insensitive to climatic conditions and sunlight.
  • Applied thermostatic plastic resins.
  • Reduced wave velocities as compared to other structure materials and reduced sensitivity to fluid hammer pulses.  
  • Uniform and controlled production provide 
    high mechanical pipe properties.

Advantages
  • Lower pumping costs.
  • Fewer connectors, fast installation, greater distances between supports of overhead pipelines, lower transportation costs.
  • Enables optimizing most of the pipelines during the design phase, according to the operational conditions of the pipes.  
  • Over 50 years expected lifespan for corrosive liquids and soils. Coating or cathodic protection are not required, low maintenance costs.
  • High Hazen Williams coefficient (approximately C=150), low friction, significant savings on energy, very good wear resistance. Minimal sediment and organism adhesion to pipe lining.
  • Easy to transport and install, using lifting tools for small loads.
  • Easy and convenient to install, no special equipment or machinery required.  Excellent pressure and sub-pressure resistance. Allows angular deviation between pipes (up to 3% for small diameters). Enables connecting pipes of any length and at any section. Can be installed with any pipe cutting and/or fitting.
  • A wide variety of options during piping design and an option to design complex pipeline courses.
  • Flexible deployment and "bridging" where pipelines don't match.
  • Reduced sensitivity to mechanical damage during installation.
  • Enables exposed storage and installation.
  • High performance at high temperatures as compared to thermoplastic piping such as PP and PE.
  • Fewer systems required for protection from fluid hammer pulses.
  • Compatible with all international and Israeli standards. 
  • requirements.

   Projects

   News



Properties
  • Enlarged internal diameter - hydraulic flow.
  • Long pipelines.
  • Extensive pressures and rigidity ranges, according to the engineering needs and requirements.
  • Nonmetallic pipe with high internal and external corrosive resistance.
  • Excellent and constant internal smoothness, unchanged over the years.
  • Low weight.
  • GRP connectors manufactured by Fibertech. 
  • A wide variety of pipe fittings, including special shapes, according to individual
  • Optional pipe bandaging, able to carry axial loads.
  • Reinforced internal and external layers.
  • Insensitive to climatic conditions and sunlight.
  • Applied thermostatic plastic resins.
  • Reduced wave velocities as compared to other structure materials and reduced sensitivity to fluid hammer pulses.  
  • Uniform and controlled production provide 
    high mechanical pipe properties.

Advantages
  • Lower pumping costs.
  • Fewer connectors, fast installation, greater distances between supports of overhead pipelines, lower transportation costs.
  • Enables optimizing most of the pipelines during the design phase, according to the operational conditions of the pipes.  
  • Over 50 years expected lifespan for corrosive liquids and soils. Coating or cathodic protection are not required, low maintenance costs.
  • High Hazen Williams coefficient (approximately C=150), low friction, significant savings on energy, very good wear resistance. Minimal sediment and organism adhesion to pipe lining.
  • Easy to transport and install, using lifting tools for small loads.
  • Easy and convenient to install, no special equipment or machinery required.  Excellent pressure and sub-pressure resistance. Allows angular deviation between pipes (up to 3% for small diameters). Enables connecting pipes of any length and at any section. Can be installed with any pipe cutting and/or fitting.
  • A wide variety of options during piping design and an option to design complex pipeline courses.
  • Flexible deployment and "bridging" where pipelines don't match.
  • Reduced sensitivity to mechanical damage during installation.
  • Enables exposed storage and installation.
  • High performance at high temperatures as compared to thermoplastic piping such as PP and PE.
  • Fewer systems required for protection from fluid hammer pulses.
  • Compatible with all international and Israeli standards. 
  • requirements.

Contact us

* 
* 
 
Field marked with* is required

News

Projects